HVT-1000A Micro Hardness Testing & Analysis System
Micro-Vickers Hardness Testing System

No translation available yet — Chinese original below Full description (Chinese original) ↓
What it can measure — the first thing to check against your samples
Error, repeatability and smallest reading — whether data can be used for acceptance
Objectives, eyepieces, illumination and field of view
Stage, travel, dimensions and weight — siting and fixturing
Loading mode, speed, dwell and software interfaces
Power, consumption and ambient requirements
Standard, optional and supplied-with items
Additional notes
Specifications vary with configuration — confirm the final technical agreement with our engineer. Optional items are priced separately.
| 1 、窗口式操作系统 | 8 、微小颗粒的精确定位测试 |
|---|---|
| 2 、多功能弹窗结构 | 9 、检测区域自动识别 |
| 3 、3D压痕自动解剖 | 10 、关键检测区压痕保存 |
| 4 、快速自动硬度测量分析 | 11 、多种成像色彩选择 |
| 5 、报表式硬度数据存储 | 12 、自动给定压痕深度 |
| 6 、支持材料性能计算 | 13 、多硬度单位自动对照 |
| 7 、自动评定测试误差 | 14 、特殊功能要求可开发(如断裂韧性检测、脆性评定) |
| Test Force | 0.098N(10gf) 、 0.245N(25gf)、0.49N(50gf)、 0.98N(100gf)、 1.96N(200gf) 、 2.94(300gf)、4.90N(500gf)、 9.80N(1000gf). |
| Test force loading method | Automatic · PC control / automatic |
| Turret Mode | Automatic · PC control / automatic |
| 硬度测量 | Automatic |
| 主机控制 | 7 寸彩色触摸屏控制系统 |
| Magnification | 100X 、400X(可选1000X) |
| 长度测量 | PC control |
| 压痕深度 | 自动测量 |
| 精确定位 | 框选 |
| 压痕成像 | 2D/3D |
| 基点补偿 | Automatic |
| 测试报告 | Automatic |
| 硬度对照 | Automatic |
| Dwell Time | 0-60S |
| 定点测试范围 | 5um |
| Min. Detection Unit | 0.01um |
| 硬度测试范围 | 1-6000HV (可选更大范围) |
| Max Specimen Height | 85mm |
| 压头中心距离 | 100mm |
| 平台尺寸X/Y | 100mmX100mm |
| 移动行程X/Y | 25mmX25mm |
| Overall Dimensions | 405 ×290×480mm |
| Main unit weight | 40kg |
| Power Supply | 220V/50HZ |
| Main Unit | 一台 |
| 砝码 | 七只 |
| 十字平台 | 一套 |
| 平口夹具 | 一套 |
| 水平泡 | 一只 |
| 螺丝批 | 二把 |
| 水平螺钉 | 四只 |
| Micrometer eyepiece | 一只 (10X) (自动采集压痕) |
| Objectives | 一只 (40X) |
| Objectives | 一只 (10X) |
| 显微维氏压头 | 一只 |
| 显微硬度块 | 二块 |
| Spare Fuses | 二只 |
| Adapter lens | 一只 |
| 成像机 | 一套 |
| 笔记本电脑 | 一套 |
| HMAS software | 一套 |
| Printer | 一只(主机内) |
| Power supply 线 | 一根 |
| Optional accessories : | 1 、努氏压头,2、100X物镜,3、万能夹具,4、镶嵌夹具,5、细丝夹具,6、自动平台。 |
Some specification values are given in the original Chinese wording; ask our engineers for an English datasheet.
The English text on this page summarises the model and specifications. The full technical description is the Chinese original below; an English datasheet is available from our engineers on request.
显微硬度计从原理结构上说:特点是试验力小,能对其它硬度试验法不能测定的细小试样进行硬度测定,例如微小型样件,表层处理类样件。从测量范围来说,相比其他机型测试的范围更加广泛,超软材料、超硬材料、脆性材料几乎都可以测试。所以相对于其他机型也可以称之为“小万能硬度计”。 ---与HMAS硬度测试分析软件相结合,除常规的硬度检测外,又能够实现长度测量以及简单的金相组织观察(例如表层处理类样件,硬度检测、处理层深度、金相组织的简单观察都可以一次性完成)。并且以分析报告形式输出或存档,具备永久的可追溯性。
金相分析讲义-金相分析免费视频课程 :http://shanghaizhongyan.com/
Yes. Beyond the standard configuration, measuring range, fixtures, optics and software functions can be adapted. Send your sample and test requirements and our engineers will return a configuration list and quotation.
Yes. Samples can be mailed to our Shanghai Fengxian laboratory for free testing with a written report, or you can book an on-site demonstration to confirm the workflow and data format.
Standard configurations usually ship within 15-30 working days, including first installation, commissioning and operator training. The instrument carries a one-year warranty and software upgrades are free for life.
General information only — final configuration and applicable conditions are subject to the mutually confirmed technical document.
Micro-Vickers Hardness Testing System
Micro-Vickers Hardness Testing System
Micro-Vickers Hardness Testing System
Micro-Vickers Hardness Testing System
Lines are staffed 08:30–17:30 on business days. Leave a message after hours and we reply the next working day.
Call Us021-51693591 Email for a quotezhongyanyiqi@163.com Send a messageInclude material and specimen size for a faster answerShortlisted from our own range only; final specifications confirmed by our engineers. Full selection →