Custom Product Projects
This page answers two questions: which section each in-development instrument will live in, and what concrete products each of our 19 custom-project directions can deliver. Catalogue products remain defined by their datasheets; custom projects are quoted with a plan and lead time after we review material, temperature, atmosphere, load and specimen size.
In-development instruments: where they belong
The table gives placement only. Items mapped to an existing category will appear in that line; items needing a new category are added when the section goes live.
| Instrument in development | Suggested placement | How it is placed |
|---|---|---|
| Prism coupler | Analysis · Optical analysis | New sub-category: refractive index and thin-film thickness, complementing the spectrometer line |
| Prism coupler 1550 nm | Analysis · Optical analysis | Same as above, aimed at infrared waveguides and thin films |
| Imaging spectroscopy | Analysis · Spectrometers | Folded into the existing spectrometer line, adding area-sensor imaging models |
| Robot dual-modal spectral vision | Analysis · Spectrometers | Spectrometry plus robotic handling, configured per production-line project |
| 3D digital image correlation | Testing machines · Optical non-contact | Adds optical strain measurement to the testing-machine line, used together with universal testers |
| DIC blue light source | Testing machines · Optical (accessory) | An accessory to 3D-DIC, listed under accessories |
| In-line pipe thread measurement | Metrology · In-line gauging | Folded into dimensional metrology as a new in-line / dedicated gauge category |
| Turntable 3D reconstruction | Metrology · 3D measurement | Sits alongside CMM and vision measurement for full-dimension reconstruction of small parts |
| Bilateral telecentric optics | Metrology · Vision (component) | Supplied as a core component of vision measuring systems |
| AOI inspection 2D/3D | AOI & vision inspection (new line) | A separate line: chip and device appearance plus dimensional inspection |
| Industrial borescope | Analysis · NDT | Folded into the existing NDT line |
| BOS gas flow visualisation | Metrology · Flow visualisation | New sub-category: optical flow and thermal-field measurement |
| In-line Rockwell (gantry) | Hardness · In-line | Part of the hardness line, released as an in-line / automated series |
| In-line Vickers (gantry) | Hardness · In-line | Same, with automated traverses and vision readout |
| In-line Brinell (gantry) | Hardness · In-line | Same, aimed at cast and forged blanks |
| Ultra-precision lapping | Metallography · Grinding/polishing | Part of metallographic preparation, adding a precision / semiconductor specimen tier |
| CMP chemical mechanical polishing | Metallography · Polishing | Grouped with ultra-precision lapping, for wafers and ceramics |
| Mounting curing oven | Metallography · Mounting | Supporting equipment for the mounting step |
| Laser heat treatment & annealing | Process equipment (non-testing) | A separate "materials process equipment" section, not mixed with testing instruments |
| Hydraulic servo valve | Testing machines · Core component | A core component of hydraulic universal testers, also supplied separately |
| Light sources (common platform) | Component platform | Supplied across the DIC, spectrometry and borescope lines |
19 custom-project directions and their products
Grouped into environment, measurement and automation, each direction lists the concrete products we can build to order — all custom-engineered and project-delivered. Requirements outside the catalogue can be assessed directly from your case.
Extreme environments & mechanical testing
These map onto the Extreme Environment line. We organise them as a two-axis selector: environment (vacuum / temperature / atmosphere / radiation) against loading (static / dynamic / impact / fatigue).
- Vacuum and UHV systemsVacuum chamber + loading frameProducts we can build to order:Vacuum universal testers, vacuum creep/stress-rupture machines, vacuum fatigue machines, vacuum hardness testers, vacuum furnaces, vacuum coating & annealing units
- Vacuum thermal cycling (−150…+150 °C)Thermal cycling in vacuum for space hardwareProducts we can build to order:Thermal vacuum chambers, component-level thermal cycling cells, soak-cycle rigs for satellite parts, vacuum ageing ovens
- Thermal shock (hundreds of K/s)Fast ramp with furnace and quenchProducts we can build to order:Thermal-shock testers, induction-heating water-quench rigs, two/three-zone shock chambers, gas-flame ablation rigs
- High pressure & temperature (10 MPa–GPa, >1000 °C)Shared cell with high-temperature indentationProducts we can build to order:High-pressure high-temperature creep machines, autoclave mechanical rigs, high-temperature indenters, test units for UHP sintering
- Cryogenic mechanics (−196…−269 °C)Cryogenic grips and extensometerProducts we can build to order:LN2 tensile/compression testers, cryogenic impact machines, LHe-range grips, cryogenic extensometers and baths
- High-temperature oxidation & corrosionAtmosphere control with high-temperature furnaceProducts we can build to order:Oxidation furnaces, steam oxidation rigs, hot-corrosion rigs, SCC testers, slow strain rate machines
- Split-Hopkinson pressure barDynamic testing, separate tierProducts we can build to order:Split-Hopkinson pressure/tension bars, high-temperature SHPB (≤1200 °C), miniature SHPB, gas-gun loaders, dynamic shear fixtures
- High-frequency fatigue (tens of Hz–kHz)Electromagnetic/ultrasonic fatigue under testing machinesProducts we can build to order:Electromagnetic resonance fatigue machines, ultrasonic fatigue systems (20 kHz), high-frequency torsion rigs, HT + HF combined fatigue machines
- Multi-atmosphere environmentsShares the atmosphere platformProducts we can build to order:High-pressure hydrogen mechanical testers, hydrogen embrittlement rigs, inert-atmosphere furnaces, corrosive-gas cycling chambers
- Space environment simulatorIntegrated chamber, project-basedProducts we can build to order:Thermal vacuum chambers, solar simulators, UV/particle irradiation units, atomic-oxygen exposure rigs, dust environment simulators
- Multi-physics couplingA coupling configurator within the extreme lineProducts we can build to order:HT-vacuum-mechanical coupled testers, EM-assisted loading rigs, irradiation-mechanical platforms, thermo-mechanical-atmosphere fatigue machines
Measurement, imaging & specimen preparation
These extend four existing lines — dimensional metrology, spectrometry, NDT and metallographic preparation — as new methods rather than new model numbers.
- Automated DIC speckle preparationFixtures paired with 3D-DICProducts we can build to order:Automated speckle sprayers, stencils & coatings, speckle-quality software, high-temperature (1200 °C) speckle process kits
- Ion and electron beamBetween metallographic preparation and microscopyProducts we can build to order:Ion milling thinners, cross-section ion polishers, twin-jet electropolishers, FIB specimen services
- AI in instruments (materials database, property prediction)Lives in software and the selection centre, not a product categoryProducts we can build to order:Materials property databases, AI indentation reading, automated metallographic rating software, test-data prediction tools
Automation & intelligence
Treated as an upgrade path across the catalogue: any existing machine can be extended along these axes instead of spawning a separate line.
- Chip and device testingPackaged with the AOI lineProducts we can build to order:Die shear/bond-pull testers, wire-bond strength testers, wafer-level AOI stations, lead coplanarity gauges
- Precision motion controlA platform component reused across linesProducts we can build to order:Motorised stages & rotary tables, closed-loop force-control actuators, multi-axis controllers, air-bearing vibration isolators
- Retrofit of legacy instrumentsProject-quoted service itemProducts we can build to order:Digital/automation retrofits for legacy hardness testers, servo conversion of hydraulic UTM, controller & software upgrades, digital imaging retrofits for microscopes
- Acquisition rate 40 Hz → ≥100 HzStarts with the high-temperature indenter, then hardness testersProducts we can build to order:Multi-channel DAQ cards (≥100 Hz), high-bandwidth amplifiers, 100 Hz upgrade kits for HT indenters, real-time curve software modules
- Full automation / unattended labDelivered in three stages: handling, measurement, dataProducts we can build to order:Automated hardness cells, robot + vision handling units, unattended grinding/polishing lines, LIMS/MES interfaces
Have a specific case to discuss?
Custom projects are usually built to the case: tell us material, temperature, atmosphere, load and specimen size, and our engineers will say whether a catalogue model covers it or a development project is needed.