Operating Precautions for the Metallographic Mounting Press
Articles in this section are published in Chinese. Contact us for English materials.
① 树脂用量按模具容积计算,过多顶死、过少包不住;② 升温分段(如 120 ℃ 再升到 175 ℃),避免急热产生气泡;③ 保压时间给足,冷却到 60 ℃ 以下再脱模;④ 定期清理模具内壁与压头残料;⑤ 冷镶嵌注意通风与配比准确。