कस्टम उत्पाद प्रोजेक्ट
यह पृष्ठ दो बातें बताता है: विकासाधीन उपकरण किस अनुभाग में आएँगे, और कस्टम दिशाओं में कौन-कौन से उत्पाद बनाए जा सकते हैं।
विकासाधीन उपकरण: किस श्रेणी में
तालिका केवल स्थान-निर्धारण देती है। मौजूदा श्रेणी में आने वाले उपकरण सीधे उसी लाइन में दिखेंगे।
| विकासाधीन उपकरण | सुझाया गया स्थान | स्थापना विधि |
|---|---|---|
| Prism coupler | Analysis · Optical analysis | New sub-category: refractive index and thin-film thickness, complementing the spectrometer line |
| Prism coupler 1550 nm | Analysis · Optical analysis | Same as above, aimed at infrared waveguides and thin films |
| Imaging spectroscopy | Analysis · Spectrometers | Folded into the existing spectrometer line, adding area-sensor imaging models |
| Robot dual-modal spectral vision | Analysis · Spectrometers | Spectrometry plus robotic handling, configured per production-line project |
| 3D digital image correlation | Testing machines · Optical non-contact | Adds optical strain measurement to the testing-machine line, used together with universal testers |
| DIC blue light source | Testing machines · Optical (accessory) | An accessory to 3D-DIC, listed under accessories |
| In-line pipe thread measurement | Metrology · In-line gauging | Folded into dimensional metrology as a new in-line / dedicated gauge category |
| Turntable 3D reconstruction | Metrology · 3D measurement | Sits alongside CMM and vision measurement for full-dimension reconstruction of small parts |
| Bilateral telecentric optics | Metrology · Vision (component) | Supplied as a core component of vision measuring systems |
| AOI inspection 2D/3D | AOI & vision inspection (new line) | A separate line: chip and device appearance plus dimensional inspection |
| Industrial borescope | Analysis · NDT | Folded into the existing NDT line |
| BOS gas flow visualisation | Metrology · Flow visualisation | New sub-category: optical flow and thermal-field measurement |
| In-line Rockwell (gantry) | Hardness · In-line | Part of the hardness line, released as an in-line / automated series |
| In-line Vickers (gantry) | Hardness · In-line | Same, with automated traverses and vision readout |
| In-line Brinell (gantry) | Hardness · In-line | Same, aimed at cast and forged blanks |
| Ultra-precision lapping | Metallography · Grinding/polishing | Part of metallographic preparation, adding a precision / semiconductor specimen tier |
| CMP chemical mechanical polishing | Metallography · Polishing | Grouped with ultra-precision lapping, for wafers and ceramics |
| Mounting curing oven | Metallography · Mounting | Supporting equipment for the mounting step |
| Laser heat treatment & annealing | Process equipment (non-testing) | A separate "materials process equipment" section, not mixed with testing instruments |
| Hydraulic servo valve | Testing machines · Core component | A core component of hydraulic universal testers, also supplied separately |
| Light sources (common platform) | Component platform | Supplied across the DIC, spectrometry and borescope lines |
कस्टम-प्रोजेक्ट दिशाएँ और उनके उत्पाद
पर्यावरण / मापन / स्वचालन — तीन समूहों में बाँटकर, हर दिशा में बनाए जा सकने वाले उत्पाद; सब कार्य-स्थिति के अनुसार डिज़ाइन, प्रोजेक्ट आधार पर आपूर्ति।
Extreme environments & mechanical testing
These map onto the Extreme Environment line. We organise them as a two-axis selector: environment (vacuum / temperature / atmosphere / radiation) against loading (static / dynamic / impact / fatigue).
- Vacuum and UHV systemsVacuum chamber + loading frameऑर्डर पर बनाए जा सकने वाले उत्पाद:Vacuum universal testers, vacuum creep/stress-rupture machines, vacuum fatigue machines, vacuum hardness testers, vacuum furnaces, vacuum coating & annealing units
- Vacuum thermal cycling (−150…+150 °C)Thermal cycling in vacuum for space hardwareऑर्डर पर बनाए जा सकने वाले उत्पाद:Thermal vacuum chambers, component-level thermal cycling cells, soak-cycle rigs for satellite parts, vacuum ageing ovens
- Thermal shock (hundreds of K/s)Fast ramp with furnace and quenchऑर्डर पर बनाए जा सकने वाले उत्पाद:Thermal-shock testers, induction-heating water-quench rigs, two/three-zone shock chambers, gas-flame ablation rigs
- High pressure & temperature (10 MPa–GPa, >1000 °C)Shared cell with high-temperature indentationऑर्डर पर बनाए जा सकने वाले उत्पाद:High-pressure high-temperature creep machines, autoclave mechanical rigs, high-temperature indenters, test units for UHP sintering
- Cryogenic mechanics (−196…−269 °C)Cryogenic grips and extensometerऑर्डर पर बनाए जा सकने वाले उत्पाद:LN2 tensile/compression testers, cryogenic impact machines, LHe-range grips, cryogenic extensometers and baths
- High-temperature oxidation & corrosionAtmosphere control with high-temperature furnaceऑर्डर पर बनाए जा सकने वाले उत्पाद:Oxidation furnaces, steam oxidation rigs, hot-corrosion rigs, SCC testers, slow strain rate machines
- Split-Hopkinson pressure barDynamic testing, separate tierऑर्डर पर बनाए जा सकने वाले उत्पाद:Split-Hopkinson pressure/tension bars, high-temperature SHPB (≤1200 °C), miniature SHPB, gas-gun loaders, dynamic shear fixtures
- High-frequency fatigue (tens of Hz–kHz)Electromagnetic/ultrasonic fatigue under testing machinesऑर्डर पर बनाए जा सकने वाले उत्पाद:Electromagnetic resonance fatigue machines, ultrasonic fatigue systems (20 kHz), high-frequency torsion rigs, HT + HF combined fatigue machines
- Multi-atmosphere environmentsShares the atmosphere platformऑर्डर पर बनाए जा सकने वाले उत्पाद:High-pressure hydrogen mechanical testers, hydrogen embrittlement rigs, inert-atmosphere furnaces, corrosive-gas cycling chambers
- Space environment simulatorIntegrated chamber, project-basedऑर्डर पर बनाए जा सकने वाले उत्पाद:Thermal vacuum chambers, solar simulators, UV/particle irradiation units, atomic-oxygen exposure rigs, dust environment simulators
- Multi-physics couplingA coupling configurator within the extreme lineऑर्डर पर बनाए जा सकने वाले उत्पाद:HT-vacuum-mechanical coupled testers, EM-assisted loading rigs, irradiation-mechanical platforms, thermo-mechanical-atmosphere fatigue machines
Measurement, imaging & specimen preparation
These extend four existing lines — dimensional metrology, spectrometry, NDT and metallographic preparation — as new methods rather than new model numbers.
- Automated DIC speckle preparationFixtures paired with 3D-DICऑर्डर पर बनाए जा सकने वाले उत्पाद:Automated speckle sprayers, stencils & coatings, speckle-quality software, high-temperature (1200 °C) speckle process kits
- Ion and electron beamBetween metallographic preparation and microscopyऑर्डर पर बनाए जा सकने वाले उत्पाद:Ion milling thinners, cross-section ion polishers, twin-jet electropolishers, FIB specimen services
- AI in instruments (materials database, property prediction)Lives in software and the selection centre, not a product categoryऑर्डर पर बनाए जा सकने वाले उत्पाद:Materials property databases, AI indentation reading, automated metallographic rating software, test-data prediction tools
Automation & intelligence
Treated as an upgrade path across the catalogue: any existing machine can be extended along these axes instead of spawning a separate line.
- Chip and device testingPackaged with the AOI lineऑर्डर पर बनाए जा सकने वाले उत्पाद:Die shear/bond-pull testers, wire-bond strength testers, wafer-level AOI stations, lead coplanarity gauges
- Precision motion controlA platform component reused across linesऑर्डर पर बनाए जा सकने वाले उत्पाद:Motorised stages & rotary tables, closed-loop force-control actuators, multi-axis controllers, air-bearing vibration isolators
- Retrofit of legacy instrumentsProject-quoted service itemऑर्डर पर बनाए जा सकने वाले उत्पाद:Digital/automation retrofits for legacy hardness testers, servo conversion of hydraulic UTM, controller & software upgrades, digital imaging retrofits for microscopes
- Acquisition rate 40 Hz → ≥100 HzStarts with the high-temperature indenter, then hardness testersऑर्डर पर बनाए जा सकने वाले उत्पाद:Multi-channel DAQ cards (≥100 Hz), high-bandwidth amplifiers, 100 Hz upgrade kits for HT indenters, real-time curve software modules
- Full automation / unattended labDelivered in three stages: handling, measurement, dataऑर्डर पर बनाए जा सकने वाले उत्पाद:Automated hardness cells, robot + vision handling units, unattended grinding/polishing lines, LIMS/MES interfaces
कोई विशिष्ट केस चर्चा करना है?
कस्टम प्रोजेक्ट कार्य-स्थिति के अनुसार बनते हैं: सामग्री, तापमान, वातावरण, भार और नमूने का आकार बताएँ — इंजीनियर तय करेगा कि मौजूदा मॉडल चलेगा या विकास प्रक्रिया चाहिए।